| |
SW
gasket without inner and outer ring.
Spiral wound gaskets consists of a V-shaped
metal strip winding with a soft material filler
( Graphite or PTFE)
Application
: Tongue and groove flanges.
Dimensions
: ANSI & others.
Pressure : Max.
350 bar.
Temperature for
graphite :
-110°C up to 550°C. From 450°C
above consult us
Temperature:
for PTFE : -110°C up to
280°C.
|
| |
Winding
: SS
304 (other materials available on request)
Filler
material : graphite
or PTFE ( other materials is also available)
Gasket
thickness : 4.5
mm as standard (also available 6.4, 7.2 mm)
Phoenix
identification :
PS 7110.
Go
up |
|
|
SW
gasket with inner and outer ring
In addition to the wound spiral, this sealing
system is fitted with an inner and an outer
ring which serve to increase radial stability.
It is recommended for use in flat or raised
face flanges.
Application
: Steel lines, steel vessels.
Dimensions
: ANSI & others.
Pressure : Max.
350 bar.
Temperature for
graphite :
-110°C up to 550°C. From 450°C above
consult us
Temperature: for
PTFE : -110°C up to 280°C. |
| |
Winding
: SS
304 (other materials available on request)
Filler
material : graphite
or PTFE (other materials is also available)
Inner
Ring : SS
304 (other
materials is also available)
Outer
Ring : CS
Galvanized
(other materials is also available)
Gasket
thickness : 4.5
mm
Phoenix
identification :
PS 7111
Go
up |
|
|
SW
gasket with outer ring, without inner ring.
The wound spiral has an additional metallic
outer ring. Recommended for male-faced flanges.
Application
: Steel lines, steel vessels
.
Dimensions
: ANSI & others.
Pressure : Max.
350 bar.
Temperature for
graphite :
-110°C up to 550°C. From 450°C above
consult us.
Temperature: for
PTFE : -110°C up to 280°C. |
| |
Winding
: SS
304 (other materials available on request).
Filler
material : graphite
or PTFE ( other materials is also available).
Outer
Ring : CS
Galvanized (other materials is also available).
Gasket
thickness : 4.5
mm.
Phoenix
identification :
PS 7112.
Go
up |
|
|
SW
gasket without outer ring, with inner ring.
The wound spiral is produced with a metallic
inner ring and without an outer ring Recommended
for female-faced flanges .
Application
: Steel lines, steel vessels.
Dimensions
: ANSI & others.
Pressure : Max.
350 bar.
Temperature for
graphite :
-110°C up to 550°C. From 450°C above
consult us.
Temperature: for
PTFE : -110°C up to 280°C. |
| |
Winding
: SS
304 (other materials available on request).
Filler
material : graphite
or PTFE ( other materials is also available).
Inner
Ring : SS
304 (other materials is also
available).
Gasket
thickness : 4.5
mm.
Phoenix
identification :
PS 7113.
Go
up
|
