| |
Panacea ® 6962 EPDM
:
This is a specially compounded EPDM elastomer
with a peroxide curing. It is suitable for
use as gaskets in chemicals produced and or
utilized in the chlorine, caustic and Bleach
industries. It is black in color and shore
Hardness of around 60.
Application
: 6962 is a suitable gasket
material for parts requiring a wide resistance
to chemicals utilized and produced in the
Chlorine, Caustic, and Bleach chemical Industries.
Typical services are : Hot wet chlorine
Gas,Caustic Soda 33 % to 50% conc, HCl Acid
(37% conc.), Hot wet Hydrogen gas,Hypochlorous
Acid,Sodium Chlorate,Sodium Chlorate / with
Hypo Brine Ultra-Pure Brine, Alkaline Brine,
Acidified Brine etc...
Dimensions
: ANSI 150 # / other special-purpose
dimensions in various geometries and forms
are available on request.
Also available as sheet material.
Pressure : up
to max. 10 bar
|
| |
Temperature
: -20°C
up to 150°C
Gasket
thickness : 1.5,3.0,
4.8.
Phoenix
identification :
PS 5001.
Style
: 01 / 02
Go
up |
|
|
|
EPDM - B3769 ®
(Reinforced type)
This is related with reinforced type gaskets.
This is commercial quality reinforced type molded
rubber gaskets in general made from EPDM . This
low cost reinforced type gaskets ( EIL code
B3769 ) is made with other rubber materials
also (i.e. Viton,Hypalon, Natural etc )and all
such reinforced rubber gaskets is widely used
in general services of metal refinery, petrochemicals,
chemicals and for other industries . This reinforced
gaskets directly compete with other similar
reinforced type rubber gaskets which are available
and made in India.
Application
: This is used as Pipe and equipments
flange gasket in general services of above industry.
Dimensions
: ANSI 150 # & other. Special-purpose
dimensions in various geometries and forms are
available on request.
Pressure : up
to max. 10 bar |
| |
Temperature
: -20°C
up to 130°C
Gasket
(Molded) thickness : 1.5,3.0,5
and as per requirement.
Phoenix
identification :
PS 5001 A.
Style
: 01 / 02 & also available
as Dual Molded Type
Go
up |
|
|
PTFE
Noose Electrolytic EPDM.
The Basic design is PTFE Bonded with Electrolytic
special EPDM having double concentric convex
sealing ring ( Dual Molded) . Normally available
as Full Face gaskets, but it can be supplied
as Ring gaskets to suit Raised Face Type flanges.
Application
: PTFE
Noose Electrolytic EPDM is an ideal material
for parts requiring a wide resistance to chemicals
utilized and produced in the Chlorine, Caustic,
and Bleach Industries. Typical services are
Caustic Soda 33%, Sodium chlorate liquor,
semiconductor, High purity media, Acids, etc.
Dimensions
: ANSI - Full Face 150 #.
Pressure : up
to max. 10 bar |
| |
Temperature
: -20°C
up to 150°C
Gasket
(Molded) thickness : 5
mm overall.
Phoenix
identification :
PS 5002.
Style
: Dual Molded
Go
up |
|
|
|
Special
Vinyl - Panacea ® PP 340 / R3400 , PP -363
Tygon ® R3400 / PP 340 is a specially compounded
plasticized vinyl ( PVC ) sheets suitable for
the use as gaskets in chemicals such as chlorine
dioxide , sodium Hydroxide, Sodium
Hypochlorite, Wet chlorine gas etc. PP
-363 is specially developed
Vinyl gaskets used for the Hydrogen peroxide
application.
Pancea
PP 340
Application :
Primarily used for Bleach Chemical - Chlorine
Dioxide (Liquid & Gas applications).
PP
-363 Application :
Primarily
used for Bleach Chemical - Hydrogen Peroxide.
Dimensions : ANSI 150 # / other
special-purpose dimensions in various geometries
and forms are available on request.
Also
available as sheet material.
|
| |
Pressure
: up
to max. 10 bar
Temperature
: up
to 80°C.
Gasket
thickness : 1.5,
3 mm.
Phoenix
identification :
PS 5003 & PS 5004.
Style
: 01 / 02
Go
up |
|
 |
"
Reduced Area " Low Torque gasket
:
The basic design of gaskets corresponds to US
Patent # 6682081 I.e "
One piece Reduced area" ePTFE gaskets.
It Seal flanges with 20 to 50 % lower bolting
torque then the conventional full face type
gaskets which facilitate to develop tight seal
on all delicate / Non - metallic flanges without
any flange breakages.
Application
: For all lightly loaded flanges
- FRP, PVC,CPVC, PVDF, Cast Iron, API 650 Manways
etc.
Dimensions
: ANSI 150 , 300 # / other.
Pressure : constructed
for pressure rating of flanges.
|
| |
Temperature
: up
to 230°C.
Gasket
thickness : 3
mm.
Phoenix
identification :
PS 5005.
Style
: 04 ( Modified Full Face )
Go
up |
|
 |
Special
Restructured PTFE - PTG - W
Panacea ® PTG - W is a high-quality, multi-directional
oriented sealing material on PTFE basis, filled
with inorganic beads. This single gasket material
in general can be used in the same conditions
and service where Gylon®
3504,3510,3500,400 Unee, Sigma 500,511,533 and
Topchem ® 2000, 2003, 2005, 2006
& other similar modified and filled PTFE
gasketing system is used.
Application
: Steam, Oils ,Tio2, Clo2, Liquid
chlorine, Acids, caustics, H202, Oleum, Liquid
Oxygen etc.
Dimensions
: ANSI & Other Special-purpose
dimensions are available on request.
Also available as sheet material.
Pressure : up
to max. 103 bar |
| |
Temperature
: -200°C
up to 260°C.
( WARNING! Observe pressure-temperature dependency
)
Gasket
thickness : 1.5,
3 mm.
Phoenix
identification :
PS 5006.
Style
: 01 / 02
Go
up |
|
 |
GORE-TEX® Bi-axially Expanded PTFE.
PS 5007 derived from premium and high-quality,
multi-directional oriented ePTFE sheet ( GORE-TEX
® ). Beside the Cut gaskets and sheets these
materials is also available in other form like
Joint sealants ( PS 5007A ).
Application
: Steel flanges, enamel flanges,
FRP, ceramic, Graphite, Al, Plastic and Rubber
lined flanges etc.
Dimensions
: ANSI & Other.
Also available as sheet material.
Pressure : Full
Vacuum to 200 bar |
| |
Temperature
: -268°C
up to 315°C.
( WARNING! Observe pressure-temperature dependency
)
Gasket
thickness : 1,
1.5, 2, 3, 4, 5 mm.
Phoenix
identification :
PS 5007.
Style
: 01 / 02
Go
up |
|
 |
PS
5007 A - Expanded PTFE Joint sealants
Expanded PTFE joint sealant is a low density,
highly compressible, 100% PTFE form-in-place,
cord form gasket material. Supplied
as an adhesive-backed cord, gaskets are fabricated
by forming the cord around the perimeter of
the sealing surface and crossing the ends.
Expanded
PTFE joint sealant is a very cost effective,
high performance alternative to cut sheet gaskets
when sealing large equipment flanges. although
we deals mainly in premium quality of expanded
PTFE Joint sealants of GORE-TEX ® make,
other Low cost joint sealants solution is also
now available.
Application
: Sealing of large equipment
Steel flanges, enamel flanges, FRP, ceramic,
Graphite, Al, Plastic and Rubber lined flanges
etc.
Dimensions
: Available 1/8 ", 3/16
",1/4 ",3/8", 1/2", 3/8",3/4"
and 1" in spool length from 15 feet to
1000 feet.
Pressure : Full
Vacuum to 200 bar
Temperature
: -268°C
up to 315°C.
( WARNING! Observe pressure-temperature dependency
)
Go
up
|
|
|
